Bathtubs are constantly exposed to water and soap. They get regular rinsing every time someone bathes in them. That’s why many tend to think that they do not require regular thorough cleaning. This misconception needs to stop.
The need for regular cleaning
Just like every other implement or fixture in a bathroom, the bathtub needs periodic cleaning. Rinsing it with water after every use is not enough. Over time, impurities in the water are deposited onto the surface of the bath. Minerals in the water can also accumulate on the bath’s surface.
Left unaddressed, this accumulation of impurities and minerals causes unsightly discoloration and calcification. It can be very difficult to remove. It’s like trying to clean a water-stained aquarium or a neglected toilet bowl that has already amassed mineral stains.
This problem affects all kinds of bathtubs. According to the bath sellers at http://www.jtspas.co.uk, all bathtubs eventually succumb to various cleaning problems. To address this problem, you need to get the right cleaning products.
Harsh chemicals are generally not advisable for cleaning, especially if the bathtub is shared with little kids. Strong bleach and hydrochloric acid should only be used as last resort cleaning supplies. You can clean your bath effectively using safe and natural cleaning agents such as lemon juice. Some also swear by the effectiveness of baking soda in taking out stains. You may want to give these a try. If these don’t work, you can buy more powerful but safe cleaning solutions.
If you have slow drainage in your tub, sprinkle some baking soda into the drain and pour in some vinegar. The base-acid reaction can help loosen mineral accumulation in the drain and restore the free flow of water.
If you encounter rust stains, you can use borax and lemon juice. Produce a borax and lemon juice paste and apply it on the affected areas. Let the paste stand for up to an hour. You can then start scrubbing off the stain, then rinse the tub with tap water.
Do not use highly abrasive materials when cleaning your bath. Steel wool and scouring powders, for example, can scratch the surface of the tub. The scratch makes the smooth surface rough and more prone to accumulating dirt.
If you need to use powerful chemicals to deal with tough stains, make sure you do the cleaning with all windows and doors open. There should be enough ventilation so you don’t inhale the toxic fumes of the strong cleaning agents you intend to use. Also, wear a mask or some form of protection to minimize the amount of fumes you get to inhale.
If you want to keep your bathtub squeaky clean, you need to make cleaning a habit. Remove the dirt and water impurities from your bath while they are still soft. Don’t let them build up and harden. See to it that your bath is clean before and after every use.